How to Hook Up a Water Line to an ice box Through the Sink

March 29, 2021

Related Articles

A fridge having a automatic ice maker and an integral water dispenser does nothing at all should you not have water line for connecting to it. Numerous houses have a fridge water supply line set up during initial construction, but this particular feature wasn’t contained in the building that is original of some domiciles. You are able to re re solve this having an ice manufacturer installation kit which allows one to make use of the plumbing work underneath the sink. The kit offers you the necessary components to connect a water line up to your ice box.

Find your water supply lines beneath your sink. You could have three water supply lines under the sink; two lines connect straight to the tap as the line that is third towards the dishwasher. The valve attached to the proper side for the tap may be the cool water supply line. Turn the cool water on the supply line clockwise to shut it.

Connect a drill that is 5/16-inch to your drill. Drill holes into the base case walls to route water line from underneath the sink towards the back associated with fridge. Drill as near to your wall that is back of case as you are able to, and that means you don’t lose space for storage in the cabinet.

Thread the water line, contained in the ice manufacturer installation kit, through the area behind the fridge to underneath the sink. Keep the extra water line behind the fridge.

Switch on the water that is cold to empty any water kept into the supply line. Utilize pliers to untwist the faucet supply line through the water supply valve that is cold.

Wrap threads regarding the water that is cold with 2 or 3 wraps of thread-seal tape. Twist the male end of the quick-tee adapter onto the valve. Wrap the female thread on the contrary end associated with adapter with thread-seal tape. Twist the supply that is faucet on the feminine end associated with adapter.

Slide the compression nut that was included with the kit throughout the newly set up supply line. Ensure that the threads are dealing with the end associated with line. Thread the ferrule through the kit on the brand new line.

Wrap the rest of the male threads regarding the adapter that is quick-tee thread-seal tape. Insert the new water line in to the opening regarding the tee. Slip the compression nut within the threads that are male tighten up it regarding the adapter.

Tighten all three nuts in the quick-tee adapter with pliers or an adjustable wrench. Usually do not twist the nuts too tight as this can harm the supply valve, the supply line while the adapter.

Put the finish associated with water line you want to hook up to the fridge as a bucket that is 5-gallon. Turn the cool water supply valve on underneath the sink. Let a few gallons of water explain to you the line that is new eliminate the atmosphere. Turn the supply line off.

Slip the rest of the compression nut and ferrule within the ice box end of this new water line. Link the line into the water line connector regarding the straight back regarding the fridge.

Turn the supply line on again. Watch out for leakages at all of the connections. Fasten the connections slightly if the truth is a drip. If tightening the text will not stop the drip, turn the water off, get rid of the connector and include additional thread-seal tape before reconnecting water line.

Plug your fridge to the wall. Coil the water that is excess behind the refrigerator. Drive the fridge up against the wall surface.